Cctv Tester Monitor

SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test


SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test

SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test   SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test
4K 7 IP CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Test 19201200 8GB New. The 7 inch touch screen IP camera monitor is designed for maintenance and installation of IP cameras, analog cameras, TVI, CVI AHD, SDI cameras, as well as testing 4K H. 265 camera by mainstream, The 1920x1200 resolution enables it to display network HD cameras and analog cameras in high resolution. The unit supports many ONVIF PTZ and analog PTZ control. The combination of touch screen and key buttons make the IP camera tester very user- friendly. The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, PING, and IP address searching. You can use the blue cable tracer to locate individual connected cables from a bundle of cables. Test LAN cable for proper connection termination. Other functions include providing 24W PoE power to your camera, HDMI IN and out, CVBS loop test , testing IP and analog at the same time, LED Flashlight, DC 12V 2A power output and much more. Its portability, user-friendly design and many other functions make the IP tester an essential tool for all installers or technicians.

New 7 inch touch screen cctv tester with retina display , 19201200 resolution. IP and analog testing at the same time. Supports TVI, CVI AHD, SDI cameras. In HDMI mode, It can converter test from analog to digital with dual test window IP & HDMIN or Analog & HDMI in.

RJ45 cable TDR test and cable quality test, to test cable pair status, length, attenuation reflectivity, impedance, skew and other parameter. Screen capture, long press the key enter, can capture screen interface and save it in any time. Screen management, change functions icons order, create new directory. Themes: Lite and normal model can select , change the icons and desktop background , change sliding effect etc.

Built in Wi-Fi , display image from the wireless camera , create WIFI hotspot. Rapid video, auto scan the IP camera address, via one key to view the image. Screen lock : password lock and pattern lock are optional.

Office, quick office app (support excel, word, ppt format) doc. Rapid IP scan , auto scan whole network or other network device s IP address. CVBS loop test , tester can receive and send the color bar generator , to check BNC cable. Traffic monitoring of the tester "Lan port", display network port or WIFI connection real-time upload and download speeds and other network parameters. Shortcut button, drop-down menu , PoE power switch , IP setting, WLAN switch , HDMI IN functions etc screen lock, password lock screen or pattern lock.

IP discovery, do not need to know the first two digits of cameras IP address , it can auto-scan the whole network segment IP, and auto-modify testers IP address. Rapid ONVIF, search camera quickly, auto log in and display image from the camera, activate Hikvision camera. Hik test tool app is design for activating and debugging Hikvision camera, can auto-identify unactivated hikvision camera, also can display image from the Hikvision camera. DH test tool app is design for Dahua Camera test, and modify IP, user name and password parameters etc. ONVIF camera test, support 2592x1520.

It is used unique hardware decoding, display image from the 4 MP camera via main stream. You can select sub-stream to test higher resolution (such as 5MP) camera. ONVIF IP camera video testing. 264/MPEG4/MJPEG IP cameras, such as Dahua, HIKVISION, and ACTI Customized service is available.

Built in Wi-Fi, can receive image from wireless camera, as well as ONVIF and customized IP cameras. SDI Digital camera image display, record and screen snapshot. HD CVI camera image display, zoom, video record and playback , Coaxial PTZ control and call camera OSD menu. HD TVI camera image display, zoom, video record and playback , Coaxial PTZ control and call camera OSD menu. AHD camera image display, zoom, video record and playback, Coaxial PTZ control and call camera OSD menu.

HDMI signal output, supports up to 1080P. Analog camera image display, auto adapt and display the video format of NTSC/PAL. Support more than 30 protocols, such as PELCO-P, PELCO-D, SAMSUNG etc. Video image digital zoom to view the image in greater detail.

Snapshot function allows you to save the current image as a JPG file in the SD card. Built in enhanced image generator, send the color, pure blue and black image, test monitor transmission channel and debug display device, observe whether there are light spots or black spots on the monitor.

8GB Micro SD card included. LCD screen brightness/contrast/color Saturation adjustable. Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images). PEAK video signal level, SYNC signal level, Color burst chroma level measurement, test video signal attenuation.

Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the connected cable from messy cables. Ping test, PING is the most conventional network debugging tools; it is used for testing if the connected IP camera or other network equipments Ethernet port is working normally and the IP address is correct. In digital IP surveillance applications, if the IP cameras IP address is not known; the device cannot be used. An IP address scan can quickly search for the connected IP camera or other network devices IP address. The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power to an IP camera.

Cable test , Test LAN cable or telephone cable, UTP cable etc , cable type and the sequence of wires will be displayed. Support RS232/RS485, rate 600 115200bps adjustable. PTZ protocol analysis, control protocol command displays to check RS485 transmission. Whether is normal, easy to find the fault device. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and.

Sets and the preset position. PoE power output, supply temporary power for PoE camera. DC5V 2A power output, as a power bank.

Audio input and output, test and output the audio signal. 7.4V 51.8Wh Battery. Remaining battery charge indicator, Lithium Ion Polymer Battery can last 17 hours for normal use after charging for 8 hours. Display: New 7 inch touch screen cctv tester with retina display , 19201200 resolution.

Network Port: 10/100M auto adjust, RJ45. WIFI: Built in WIFI, speeds150M, allows you to connect to a wireless network and view IP cameras. 265 Main Stream Test: New hardware decoding, 4K, H. 264 camera image display by mainstream testing. IP Discovery: Auto-scan the whole network segment camera IP.

Rapid ONVIF: Search camera quickly, auto log in and display image from the camera, activate Hikvision camera. Hik Test Tool: Activate Hikvision camera, display image from the camera, modify IP, user name and password parameters etc.

DH Test Tool: Dahua camera test, modify IP, user name and password parameters etc. IP Camera Type: ONVIF, ONVIF PTZ, Dahua IPC-HFW2100P, Hikvision DS-2CD864-E13, Samsung SNZ-5200, Tiandy TD-NC9200S2, Kodak IPC120L, Honeywell HICC-2300T, RTSP Viewer. SDI Video Signal Test: 1 channel SDI inputBNC interface, resolution support : 720p 60fps / 1080p 60fps /1080i 60fps.

CVI Video Signal Test: 1 channel CVI inputBNC interface, resolution support 720p 25,30,50,60fps/ 1080p 25,30fps /2560x1440p 25fps, 30fpsUTC control and call OSD menu. TVI Video Signal Test: 1 channel TVI inputBNC interfce, resolution support 720p 25,30,50,60fps/ 1080p 25,30fps /2048x1536p 18,25,30fps/ 2688x1520p 15fps/ 2560x1440p 15,25,30fps / 2560x1944p 12.5,20fps UTC control and call OSD menu.

AHD Video Signal Test: 1 channel AHD inputBNC interface, resolution support 720p 25,30fps / 1080p 25,30fps/2048x1536p 18,25,30fps / 2560x1440p 15,25,30fps 2560x1944p 12.5,20fps UTC control and call OSD menu. Analog Video Test: 1 channel BNC Input & 1 channel BNC Output , NTSC/PAL (Auto adapt). Video Level Meter: PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement for cvbs camera. Zoom Image: Supports Analog and IP camera image zooming & movement. Snapshot, Video Record and Playback: Capture current images and record live video as JPG file.

Media player will view photos and playback video. HDMI IN: HDMI INSupport 720×480p /720×576p /1280×720p /1920×1080p /1024×768p/1280×1024p /1280×900p /1440×900p. HDMI Output: 1 channel HDMI output, supports up to 1080p. RJ45 Cable TDR Test: RJ45 cable TDR test and cable quality test, to test cable pair status, length, attenuation reflectivity, impedance, skew and other parameter.

12V/2A Power Output: Output DC12V/2A power to camera. USB 5V Power Output: 5V 2A power output only , NO data.

PoE Power Output: 48V PoE power output, Max power 24W. Screen Management: Lite mode and normal model available.

Under normal mode, you can change icons sequence and self-define the number of icons in each page. Theme: Self-define icons, desktop and application interface background, modify interface sliding effect. Drop-Down Menu: PoE power switch , IP setting, WLAN switch , HDMI IN functions etc screen lock, password lock screen or pattern lock.

Audio Test: 1 channel audio signal input and 1 channel audio signal output to connect headphones. Color Bar Generator: Output one channel PAL/NTSC color bar video signal for testing monitor or video cable. (red, green , blue, white and black color).

UTP Cable Tester: Test UTP cable connection status and display on the screen. Read the number on the screen. Data Monitor: Captures and analyzes the command data from controlling device, also can send hexadecimal. Network Test: IP address scan, link scan, and Ping test.

Quickly search the for IP cameras IP address on your network. Cable Tracer: Find a connected cable from a bundle of cables using audio tones. PoE /PSE Voltage Test: Measures PoE switch voltage and displays pin configuration.

External Power Supply: DC 12V 2A. Battery: Built-in 7.4V Lithium polymer battery , 7000mAh. Rechargeable: After charging 78 hours, normal working time 17 hours. Operation Setting: Capacitive touch screen, OSD menu, select your desired language: English, Chinese, Korean, Russian, Italian or Polish, etc. Dimension/Weight: 242mm x 172mm x 52mm / 1.1Kg.

The item "SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test" is in sale since Saturday, September 21, 2019. This item is in the category "Business, Office & Industrial\Test, Measurement & Inspection\Cameras & Imaging\Camera & CCTV Testers". The seller is "beverlystore123" and is located in Shenzhen. This item can be shipped worldwide.
  1. Brand: SEESII
  2. MPN: Does Not Apply
  3. Bundle Listing: No
  4. Country/Region of Manufacture: China
  5. Screen Size: 7"
  6. Model: 8600ADHSPLUS
  7. Display Technology: Retina display
  8. Max. Resolution: 1920*1200
  9. Video Inputs: HDMI-IN
  10. Type: Monitor/Display
  11. Surveillance Technology: Digital/IP
  12. Network Port: 10/100M auto adjust, RJ45
  13. WIFI: Built in WIFI,speeds150M, allows you to connect to
  14. H.265 Main Stream Test: 4K,H.264 camera image display
  15. IP Discovery: Auto-scan the whole network segment camera IP
  16. Rapid ONVIF: Search camera quickly, auto log in and display i
  17. IP Camera Type: ONVIF,ONVIF PTZ, Dahua IPC-HFW2100P, Hikvision D
  18. Analog Video Test: 1 channel BNC Input & 1 channel BNC Output
  19. 12V/2A Power Output: Output DC12V/2A power to camera
  20. USB 5V Power Output: 5V 2A power output only ,NO data
  21. PoE Power Output: 48V PoE power output, Max power 24W
  22. TVI /AHD /CVI/SDI Video Signal Test: 1 channel TVI /AHD/CVI/SDI inputBNC interfce

SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test   SEESII 4K 7 IPC CCTV Camera Monitor Tester AHD TVI CVI SDI CVBS Analog Test