The new HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD, CVI. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, LED lamp etc. Vedio monitor tester, High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality.
Video monitor tester built-in Pelco-D / P PTZ control protocol, etc. Through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus, aperture size. Multi-format video OUT port image generator, sending a variety of standard e.
PAL, NTSC color graphics section. Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.By UTP CABLE TEST port on the meter, you can test the connection of network cable. Support VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution is 1920 x 1440(IV8W) / 1920X1080 (IV8S). HD TVI video surveillance testing, support 1MP 2MP 3MP 4MP 5MP (IV8W) / 720p 25, 30, 50,60fps/ 1080p 25,30fps (IV8S). When TVI signal input, the tester will display HD TVI camera image. HD video surveillance testing, support AHD 2.0 version, 1MP 2MP 3MP 4MP 5MP (IV8W) / 720p 25,30fps/ 1080p 25,30fps (IV8S). When AHD signal input, the tester will display the AHD camera image.
HD CVI video surveillance testing, support 1MP 2MP 3MP 4MP (IV8W) / 720p 25, 30, 50,60fps/ 1080p 25,30fps (IV8S). It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours. 1x Adapter DC5V 1Awith USB cable. 1x International Standard 18650 2600ma battery. 1x Power output conversion cable. The item "5 Inch 4in1 LCD IP CCTV Tester Monitor 5MP AHD TVI 4MP CVI Camera HDMI VGA Input" is in sale since Tuesday, August 6, 2019.
This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Home Surveillance\Home Surveillance Parts & Accessories\Surveillance Monitors & Displays". The seller is "itrue2019" and is located in Shenzhen. This item can be shipped worldwide.