264 CCTV Camera Tester 8MP TVI CVI 5MP AHD SDI CVBS IP camera tester monitor with Cable tracer, TDR, Multimeter(optional). (kindly pls read carefully and choose the right model before place the order).IPC9800 Plus: for IP+analog camera test+RJ45 cable TDR test+HDMI out. IPC9800MOVT Plus: for IP+analog camera test+. Meter+ Visual fault locator+ TDR cable test + Video level meter+cable.
Meter+ Visual fault locator+ TDR cable test + Video level. (1) 7 inch IPS touch screen, 1280800 resolution , POE, DC 12V power voltage test, 1080P HDMI input. (2) IP camera test: 4K H.
264 video display via mainstream. IPC test /IPC viewer /Rapid Video/RTSP /ONVIF, Rapid Video can create testing report. Hik test tool: pressing just one key to activate hikvision camera , Image test, can modify the user name, password and IP parameters. Dahua camera test: modify the user name, password and IP parameters.
(4) HD Coxial Camera Test. AHD camera test :5MP AHD camera test, 2592x1944P 12.5/20FPS, UTC control/ call OSD menu.
TVI camera test: 8MP TVI camera test, 3840x2160P 12.5FPS, UTC control/ call OSD menu. CVI camera test : 8MP CVI camera test, 3840x2160P 12.5/20FPS, UTC control d call OSD menu. HD SDI/EX-SDI camera test :1080P 50/60 FPS. DC and AC voltage measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement. Wavelength1625,1550nm, 1490nm, 1310nm, 1300nm, 850nm, measurement range , -70 +10dBm, for optical power testing and Fiber link loss relative measurement.
10mW visual fault locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fibers bending and breakage, test range 10KM. BNC cable, network cable, telephone cable, RVV cable and elevator cable, cat 5/6 cables length and short circuit. (9)Language support: English, Chinese, Korean, Russian, Italian , Polish , Spanish, French or Japanese. 1 New 7 inch IPS touch screen cctv tester, 1280800 resolution. 265 , 4K video display via mainstream.
4xzoom , video record and playback , coaxial PTZ control and call camera OSD menu. 6 HD SDI/EX-SDI camera test , support 1080P 50/60 FPS. 7 IP & CVBS camera test, PTZ controller. New- Rapid video, just by one key to detect all network cameras and auto display.
Auto log in and display image from the camera, activate Hikvision camera, and also can create testing report. 10 New- IP and analog testing at the same time. Converter test from analog to digital with dual test window IP & CVBS.New- Screen management, change functions icons order, create new directory. New- Shortcut button, drop-down menu. Can select PoE power , IP setting, WLAN switch, HDMI IN functions etc in any interface.
Improvement cable tester, UTP cable, telephone cable etc order and connectivity test, can save testing report, if special number, need customized. New- RJ45 cable TDR test, test cable pair status, length, attenuation, reflectivity, impedance, skew etc. Password lock and pattern lock are optional. 720×480p /720×576p /1280×720p /1920×1080p /1024×768p/1280×1024p /1280×900p /1440×900p display image , record and snapshot.
18 HDMI output , support 1080P. The tester send and receive color bar generator signal , to check BNC cable. Of the tester "LAN port", display network port or WIFI connection real-time upload and download speeds and other network parameters.21 New- Customers self update software , you can install apps with android version , such as Skype, wechat etc. 22 ONVIF camera test, support 25921520, Network PTZ controller (ONVIF). Built in Wi-Fi , display image from the wireless camera. 24 New- 4K video files and MKV/MP4 media files play. 25 PoE DC48V power output, Max power 24W, 12V /2A power output/5V 2A power output, as a power bank. Quick office app (support excel , word , ppt format) doc. 27 8GB SD card including. 28 IP discovery, it can auto-scan the whole network segment IP, and auto-modify testers IP address. 29 Display its genuine resolution of the IP camera images.
30 Supports more than 30 protocols such as PELCO-P, PELCO-D, and SAMSUNG. 31 Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator. 32 POE voltage measurement, PING test , IP address scan, port flashing etc.33 Audio in /out , support record and save the audio/LED lamp, calculators, music players and other application tools. 34 7.4 V /5000mAh Lithium Ion Polymer Battery, after 56 hours charging , working time lasts 10 hours. LAN port indicator normal, the network icon shows red cross?
ONVIF Device List scanned the camera, but live video with no image? Please check IPC user name and IPC Password whether is correct or not, some cameras use TCP video streaming transport, if cant view the image, change the video streaming transport to TCP. If also cant view image, please update ONVIF.
PTZ controllerprompt no video signal input? How to update the testers function?After connect internet, enter update- online update to do applications update. You can refresh the update list by swipe down screen. ONVIF can not modify camera IP address? If ONVIF modify camera IP Address not change, please refresh or reboot the camera. If also same, please use the PC ONVIF.
If PC can not modify camera IP address, that is camera not support this function. Onvif function prompt user name or password is wrong, can not view the image? Please to check whether camera havent the user name and password, if havent user name or password, please leave password blank, and select not-verification and login. When you received the tester why need connect the charger to turn on it.
LAN port indicator is off? Check the camera power supply(3.5 inch IP Tester, you need manually turn on the power output function), connect cameras LAN port to testers LAN port, When connected well, then the indicator is green, the yellow indicator flash. If the indicator is off, check the camera and tester whether is connected well. Use two ports of Cable tracer. UTP port: its for test the cables connectivity and sorting.
PD port: Connect to POE switch, test POE switch output voltage line, if cables pin 1236 delivers power, 1236the indicator is green, if cables pin 4578 delivers power, then 4578 the indicator is yellow, if both deliver power, the two indicators light. After the IP tester update, some functions can not work? ClickSystem Set-Version information, you can check all of APPs versions, press one APP few seconds to uninstall, this APP will restore to factory version. Can we restore the ip camera tester to factory settings?
Old version: Tester without factory reset function, please press the power button to power off when there are dysfunction problems. The meter will clear the memory, and restore to factory set. Plus version: settings-factory default is ok.
Three network port of the Tester? LAN port: Ethernet interface(Network port), its for connect network camera, POE switches etc, testers POE power output also connect this port. (3.5 inch IP camera tester without POE power output function). PSE IN port: POE Voltage measurement interface, its for connect POE/PSE switches.UTP/SCAN port: its for cable test and cable tracer. When you received the tester why need connect the charger to turn on it, if disconnect, it will turn off? ONVIF and IPC TEST cannot search camera IP address. Check testers LAN port, when connected well, the indicator is green, the yellow indicator flash. The network icon on upper right corner of the screen shows normal. Whether the testers IP and cameras IP settings in the same network segment. For example: if cameras IP is 192.168.1.108, the testers IP should be 192.168.1. X, the digital X should be range of 1-106 or 107-254, (the number 108 cannot be used, because if X is 108, the IP camera testers and IP camera address is the same, it cannot test). Generally subnet mask will not change, default the gateway is 192.168.1.1. ONVIF prompt The action requires authorization and sender ISNO authorized.
Generally, appear this situation, it has not logged in, or the user name and password error, please make sure user name and passworld is correct. PTZ controller prompt no video signal input.
Use BNC cable connect the VIDEO IN and VIDEO OUT interface, if screen desktop icon becomes smaller, the BNC interface no problem. Please check the camera power supply or change another camera to test. If still prompt no video signal input , maybe is the VIDEO IN interface is bad or disconnected. If the IP camera does not supports the customized IP camera protocols and ONVIF test. Old version: You can send your camera to factory to add camera private protocol.
Or offer cameras mobile clientAndroid version. 264 CCTV Camera Tester 8MP TVI CVI 5MP AHD SDI CVBS IP tester monitor" is in sale since Wednesday, May 27, 2020. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Home Surveillance\Home Surveillance Parts & Accessories\Surveillance Monitors & Displays". The seller is "zon0-1316" and is located in Guangdong. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.